Product Code: NH93993
Availability: In Stock
£20.00 £58.20
Lawn & Garden Irrigation Repair | NDS 10.63-in L x 13-in W x 10.63-in H Round Irrigation Valve Box NH93993
  • Protect irrigation system components from the elements, foot traffic, lawncare equipment, and potential vandalism, and keep them out of sight

  • Fits over valves, control zone kits, and other underground irrigation accessories; Structural reinforcing ribs provide support and strength to protect items housed inside against damage

  • Overlapping cover prevents dirt and debris from entering the box; ICV designation; two-fingerhole design; Pipe hole facilitates irrigation pipe connections without having to dig under the box

  • Build valve and connect pipe(s); dig to allow enough depth so the lid is flush with the surface; add layer of gravel for drainage before placing box and cover in place, thread irrigation pipe through the hole; backfill

  • Box made of high-density polyethylene (HDPE); Lid made of high-density polyethylene (HDPE); both are made with a combination of virgin and recycled content treated with UV inhibitors to prevent fading and cracking

  • Box top dimensions: Top inside dimension (ID) 9-1/8 in. diameter; top outside dimension (OD) 9-11/16 in. diameter; Box bottom dimensions: Bottom ID 11-11/16 in. diameter; Bottom OD 12-13/16 in

  • Box height: 9-15/16 in.; Box pipe hole dimensions: 2-3/8 in. X 2-15/16 in

  • Lid dimensions: Top dimension is 9-1/2 in. diameter; bottom dimension is 8-11/16 in. diameter; rim thickness 1/2 in.; overall height 1-3/8 in

  • Comes with one 10 in. round valve box and cover

Blend your irrigation components into a desert landscape with the 10 in. Round Sand Valve Box and Cover. Built for durability with structural reinforcing ribs, the valve box and lid is ideal for covering a single valve, control zone kit, or other irrigation accessories and protecting them from the elements, pedestrian traffic, lawn care equipment, and potential vandalism. The round valve box includes a pipe hole to enable irrigation pipe connections. The sand irrigation control valve (ICV) cover has two finger holes to twist and remove lid for maintenance. Both the box and cover are made of high-density polyethylene (HDPE) using a combination of virgin and recycled material treated with UV inhibitors to prevent fading and cracking due to sun exposure. NDS is a leading manufacturer of water management solutions and the trusted brand of professional landscape contractors since 1972. Check out the NDS website or reach out to us for technical support—our friendly, experienced team is here to help make your project a success.

Related Products